Skip to the reading

AkzoNobel Bulletin Explains Why Automotive Color Blends Need More Panel Space

Electric Vehicles Teresa Moss 635 reads

AkzoNobel’s revised guidance maps how damage repair, primer, sealer and clearcoat affect the space needed for a color blend.

AkzoNobel Bulletin Explains Why Automotive Color Blends Need More Panel Space

A color blend can extend well beyond the visible dent or scratch. AkzoNobel’s updated technical service bulletin sets out why: each stage of repair preparation can enlarge the area, and the paint system, panel shape and available clearcoat space also affect where blending can finish. The guidance gives repairers a way to explain those considerations when discussing the work with customers or insurers.

The bulletin’s target is an undetectable color transition while keeping the repair area as compact as practical. When the repaired panel provides enough room, blending within that panel may be the more economical and efficient approach. But planning from the original damage alone can underestimate the space the finished repair needs.

Repair preparation expands the work area

The repair footprint grows in stages. First, technicians feather the damaged coating into the surrounding original finish, creating a smooth transition to the OEM clearcoat. That sanded edge reaches a few inches beyond the initial damage. Primer surfacer then covers part of this prepared area, and sanding the primer requires another gradual transition into the surrounding finish, extending the repair again.

Sealer may add another layer to the planning. Its use depends on the repair and the technician’s judgment, but when applied over the sanded primer surfacer, it extends the area beyond the primer’s sanded edge. In practical terms, a small blemish can call for a much wider prepared surface by the time the technician is ready to apply color.

Greg Askew, an AkzoNobel North America technical services specialist in vehicle refinishes, describes the bulletin as a way to make those variables easier to explain. Someone looking only at the dent might assume there is ample room to blend. The repaired edge, primer application and sanding can each push the boundary outward, with sealer potentially extending it further.

Panel shape and paint system matter

The space needed for color depends on more than the size of the damaged area. AkzoNobel identifies the damage type and extent, any additional sanding or filling, the color’s application characteristics, and the panel’s location and geometry as factors. A style line or change in panel angle can limit how effectively a technician can use the available surface.

Color behavior also affects the process. Translucent colors may call for a ground coat or extra basecoat application. Some colors or paint technologies may require a wet bed. These choices can change the area that receives basecoat, so the blend plan needs to account for the particular finish and the instructions for the coating system in use.

That makes the bulletin a planning guide rather than a fixed measurement for every repair. Askew said it aims to cover common situations while recognizing that technicians must weigh the details of each job. The stated distances are general guidance, measured outward from the final repair edge, including any additional area created by sealer. Product technical data sheets and color-specific instructions still govern application methods.

Clearcoat sets a second boundary

Clearcoat coverage places a separate constraint on the blend. AkzoNobel recommends limiting the clearcoat at the edge of the blend panel to one coat, which can help limit a perceived color shift associated with differences in clearcoat depth. At the same time, every area with basecoat—including any wet bed—needs two coats of clearcoat to provide the required UV protection for the basecoat binder and pigments.

As a result, basecoat and wet bed need to stay within the part of the repair receiving two clearcoat coats. The bulletin gives a clearcoat-only allowance of two to four inches inward from the edge of the blend panel as a reasonable starting point. The technician’s judgment and application technique determine the actual distance.

This distinction is useful when estimating the repair footprint: the edge of visible damage, the prepared area, the basecoat blend and the clearcoat boundary do not necessarily coincide. A plan that accounts for each surface can better explain why the blend may involve adjacent panel space even when the original damage appears contained.

A practical reference for repair discussions

The expanded bulletin is intended to help repairers communicate the variables behind blend-area decisions. Its value is in making the sequence visible: damage repair leads to feathering, primer, sanding and possibly sealer; then the coating system, color and panel shape influence the area needed for basecoat and clearcoat. That sequence gives customers a clearer explanation of why the final repair can extend beyond the original mark.

AkzoNobel has also said it and Axalta Coating Systems plan to use the name Axanzo for their combined company after the intended merger is complete. The two businesses are expected to continue operating independently until closing, which is expected in early 2027; Greg Poux-Guillaume is slated to lead the combined company, with Axalta CEO Chris Villavarayan as deputy CEO. For repairers using this guidance, the immediate takeaway remains practical: assess the completed repair area and coating requirements before deciding whether the available panel space can accommodate the blend.

Photo courtesy of AkzoNobel.

Source: Teresa Moss · www.repairerdrivennews.com

In the same chapter