Skip to the reading

Cellcentric’s 375-kW Truck Fuel Cell Waits on Stations and Cheaper Hydrogen

Electric Vehicles Thomas Wasson 757 reads

The BZA375 is built for heavy trucks, but cellcentric’s production plans depend on truck-ready stations and hydrogen near €6 per kilogram.

Cellcentric’s 375-kW Truck Fuel Cell Waits on Stations and Cheaper Hydrogen

Cellcentric has a fuel cell sized for a conventional heavy truck, but the step to large-scale production depends on conditions beyond the factory. The Daimler Truck and Volvo Group joint venture says truck-ready hydrogen stations and fuel near €6 per kilogram are needed before it will commit to a much larger manufacturing site in Germany.

That leaves the BZA375’s commercial path tied to coordination across vehicle makers, station operators and fuel suppliers. Cellcentric CTO Nicholas Loughlan outlined the approach during a Sept. 17 visit to the company’s headquarters in Kirchheim/Teck, near Stuttgart. “You cannot just put a product out there and expect it to scale,” he said. Fleets need a working supply network and a cost case before they place repeat orders.

A single unit replaces the twin system

The BZA375, unveiled in April 2026, produces up to 375 kW of continuous net power, or more than 500 horsepower. It weighs less than 500 kilograms and is designed to fit in the engine bay of a 13-liter diesel truck. Cellcentric says a fully loaded, 40-metric-ton truck can use less than 6 kilograms of hydrogen per 100 kilometers, equivalent to more than 10.2 miles per kilogram. The stated service life is about 25,000 hours.

Its predecessor, the BZA150, uses two 150-kW units to power a 40-ton truck. Cellcentric stopped short of full series production of that system and accelerated work on the BZA375. Loughlan says the newer unit uses 20% less fuel than the BZA150 twin setup.

The packaging is intended to suit trucks on both sides of the Atlantic. Cellcentric says the system fits North American tractors including the Volvo VNL and Freightliner Cascadia, as well as the Mercedes-Benz Actros and Volvo FH in Europe. Those fit claims broaden the potential application, though fleets still need suitable hydrogen supply and a competitive operating cost.

Esslingen is producing; Weilheim is a reserve site

Cellcentric’s pilot plant in Esslingen has handled every production step under one roof since June 2024. It is building BZA150 systems for customer fleets, with vehicles expected to reach operators starting at the end of this year. The plant is then set to increase sample production of the BZA375. Series production of the new system is planned for around the turn of the decade.

The larger site would be in Weilheim an der Teck, roughly 30 kilometers from cellcentric’s headquarters. The company has an option through the end of 2029 on 16 hectares, or about 40 acres, in the Rosenloh industrial park. Loughlan confirmed that cellcentric paid more than €15 million to reserve the land.

There is no fixed order threshold for starting construction. The decision depends on how much Esslingen can produce and how quickly demand develops. A new factory would take three to four years to build, Loughlan said, so the site is a capacity option rather than a committed production date. Cellcentric expects operations there around 2030, later than the original plan for first systems in 2026.

Hydrogen’s case rests partly on grid capacity

Loughlan argues that battery trucks alone would put a large demand on Europe’s electricity system. He estimates that converting the continent’s in-use truck fleet to battery power would require about 500 terawatt-hours of electricity, roughly Germany’s annual consumption. He described that as technically possible, but difficult to deliver economically and on a practical timetable.

His example is the Denkendorf service station on the A8 near Stuttgart, where trucks gather at the end of a shift. The location does not have truck charging today. Plans call for a 15.4-megawatt grid connection by 2035, which Loughlan said would support about 15 trucks charging at megawatt rates at once. He also said energy providers are telling prospective industrial and long-haul customers that grid upgrades cannot arrive quickly enough.

That is the rationale for developing battery and hydrogen infrastructure in parallel for heavy transport, while electrifying routes and uses where it works well. Whether two networks prove cheaper or more practical will depend on where trucks operate, how often they need energy and what local power connections can support.

Stations and fuel costs remain the bottleneck

Europe’s existing hydrogen network does not yet match heavy-truck needs. The EU’s Alternative Fuels Infrastructure Regulation sets a minimum station capacity of 1 metric ton per day, with a 700-bar dispenser, at intervals of 200 kilometers along the core TEN-T road network by Dec. 31, 2030, plus a station in each urban node. Cellcentric’s planning materials envisage heavy-duty stations that can scale to 4 metric tons per day.

Daimler Truck CEO Karin Rådström said Europe had 187 hydrogen stations at IAA Transportation, most dispensing at 350 bar. The article’s distinction is practical: these sites mainly serve passenger cars and generally aren’t configured for heavy-duty trucks that need more than 10 kilograms at 700 bar or use liquid hydrogen.

Price is another hurdle. Loughlan said a hydrogen price of €6 per kilogram would let cellcentric begin scaling; he described current European prices as substantially higher. In January, H2 Mobility began selling hydrogen to customers of truck rental firm hylane for about €8 per kilogram net at selected German stations. The companies said that was well below then-current market levels.

A funding program in Germany links station support to truck deployment, an approach Loughlan said can address the problem of fleets waiting for stations while station builders wait for customers. The latest call offered €220 million, and applicants requested support for more than 70 high-capacity stations and 800 heavy-duty trucks, according to the alliance formed at IAA by Daimler Truck, Volvo, Toyota, Bosch and four energy companies. Toyota also signed a binding agreement in July to become an equal one-third owner of cellcentric, with closing expected around year-end or early 2027.

Volume and demand will set the pace

Cellcentric’s production timetable has already shifted. When Volvo agreed in 2020 to pay €600 million for half of the venture, the partners targeted series production in the second half of the decade. Loughlan says unit costs depend on reaching volumes of tens of thousands per year, and that early production will need support.

Toyota could contribute experience from industrializing fuel cells for passenger cars such as the Mirai. Cellcentric, however, is taking a cautious stance in North America. Although the BZA375 was developed with U.S. and Canadian codes and standards in mind, Loughlan said the company sees limited current demand for zero-emission trucking in the U.S.

Truck makers face a separate commercial constraint: fleets will choose the technology that best fits each job and its total cost of ownership. Cellcentric’s fuel cell advances the hardware case, but fleets are unlikely to move from demonstration units to repeat purchases until station coverage, hydrogen prices and production volumes develop together. The next meaningful signal will be whether planned truck stations and fleet orders arrive in step.

Source: Thomas Wasson · www.freightwaves.com

In the same chapter